University of Southampton

Home Biomedical Engineering Faculty of Engineering University of Southampton  


Announcements

February 2012

BioXneT web-site launched.

Congratulations to Moresh Wankhede, who has just passed his PhD viva with minor corrections.

Congratulations to Sanjay Pant, who has been selected to display a poster in the SET for BRITATIN 2012 Engineering Sciences Session at the House of Commons

Congratulations to Hamidreza Alidousti for his paper "Do Capsular Pressure and Implant Motion Interact to Cause High Pressure in the Periprosthetic Bone in Cementless Total Hip Replacement?" being selected for a podium presentation at ORS 2012 in San Francisco, USA.

6th December 2011

Vacancy: Lecturer to complement our expertise in computational biomedical engineering.

Contact Neil Bressloff to further discuss this opportunity.

25th October 2011

Mr Giorgos Ragkousis appointed for PhD position: Coronary Artery Stent Design for Challenging Disease.

22nd September 2011

PhD position: Coronary Artery Stent Design for Challenging Disease. Contact Neil Bressloff to further discuss this opportunity. Also, see here.

26th August 2011

Congratulations to Moresh Wankhede who has just won the ASME IGTI student award. See here.

12th July 2011

Our paper, Multi-objective design optimisation of coronary stents, has just been accepted in Biomaterials (Impact factor = 7.882) as a Leading Opinion Paper.

June 2011

New PhD project: Coronary artery stent design for challenging disease.

May 2011

Congratulations to Moresh Wankhede, who has been offered a job at Rolls-Royce PLC, Derby, UK.

Prelim

These pages were first created in April 2011.

Dr Neil W. Bressloff

  • Senior Lecturer
  • MSc course co-ordinator and exams officer
  • Design search and optimisation case studies module co-ordinator
  • Aerospace CFD module co-ordinator
  • Good practice in CFD lectures

Research

Biomedical Devices Biomedical engineering device optimisation tool Haemodynamics
Design Strategies Aerodynamics

Publications

Pant, S., Limbert, G., Curzen, N. and Bressloff, N. W. , 2011, Multi-objective design optimisation of coronary stents, Biomaterials, 32: 7755-7773, DOI:10.1016/j.biomaterials.2011.07.059, to appear as a Leading Opinion Paper. PDF.

Alidousti, H., Bressloff, N. W. and Taylor, M. , 2011, Do capsular pressure and implant motion interact to cause high pressure in the periprosthetic bone in total hip replacement? J. Biomechanics, to appear.

Dubas, A., Bressloff, N. W., Fanghor, H. and Abu-Sharkh, S., 2011, Computational fluid Dynamics simulation of a rim driven thruster, Open Source CFD Conference 2011.

Pant, S., Bressloff, N. W. and Limbert, G., 2011, Geometry parameterization and multidisciplinary constrained optimisation of coronary stents, Biomechics and Modeling in Mechanobiology, 11(1): 61-82, (doi: 10.1007/s10237-011-0293-3).

Wankhede, M. J., Bressloff, N. W. and Keane, A. J., 2011, Combustor design optimisation using co-Kriging of steady and unsteady turbulent combustion, GTP-11-1113, Journal of Engineering for Gas Turbines and Power, 133, (doi:10.1115/1.4004155).

Ursache, N. M., Bressloff, N. W. and Keane, A. J., 2011, Aircraft roll enhancement via multi-objective optimization using surrogate modelling, AIAA J., 49(7): 1525-1541.

Wankhede, M. J., Bressloff, N. W., Keane, A. J. and Zedda, M., 2011, Combustor design optimisation using co-Kriging of steady and unsteady turbulent combustion, GT2011-46420, ASME Turbo Expo 2011, Vancouver, Canada.

Toal, D. J. J., Bressloff, N. W., Keane, A. J. and Holden, C., 2011, The development of a hybridized particle swarm for kriging hyperparameter tuning, Eng. Opt., 43(6): 675-699 (doi:10.1080/0305215X.2010.508524).

Wankhede, M. J., Bressloff, N. W., Keane, A. J., Caracciolo, L. and Zedda, M., 2010, An analysis of unstable flow dynamics and flashback mechanism inside a swirl-stabilised lean burn combustor, Proc. ASME Turbo Expo 2010: Power for Land, Sea and Air, GT2010-22253, 129-139, June 14-18, 2010, Glasgow, UK.

Bressloff, N. W., Mansour, M. H. and Shearman, C. P., 2010, Red blood cell migration in microvessels, Biorheology, 47(1): 73-93.

Pant, S., Bressloff, N. W., Forrester, A. I. J. and Curzen, N., 2010, The influence of strut-connectors in stented vessels : A comparison of pulsatile flow through five different coronary stents, Annals of Biomedical Engineering, 38(5): 1893-1907.

Toal, D. J. J., Bressloff, N. W., Keane, A. J. and Holden, C., 2010, Geometric filtration using POD for aerodynamic design optimization, AIAA J., 48(5): 916-928.

Toal, D. J. J., Forrester, A. I. J., Bressloff, N. W., Keane, A. J. and Holden, C., 2009, An adjoint for likelihood maximization, Proc. R. Soc. A, 465:3267-3287 (doi: 10.1090/rspa.2009.0096).

Pant, S. and Bressloff, N. W., 2009, Effect of strut connectors on haemodynamics of stented vessels, IFMBE Proc., World Congress on Medical Physics and Biomedical Engineering, 25:4, 680-683, Munich, Germany, 7-12 September.

Bressloff, N. W., Mansour, M. H. and Shearman, C. P., 2009, Microvascular cell depletion model, IFMBE Proc., World Congress on Medical Physics and Biomedical Engineering, 25:4, 2095-2098, Munich, Germany, 7-12 September.

Mansour, M. H., Bressloff, N. W. and Shearman, C. P., 2009, Blood flow in microvascular networks, 2nd Micro and Nano Flows Conf., West London, UK, 1-2 September.

Endicott, Giles, Keane, Andy J. and Bressloff, Neil W., 2008, Design of experiments in commericial off the shelf CFD: frameworks for efficiency. In, Conference Proceedings. 7th MIRA International Vehicle Aerodynamics Conference: Co-Relation. Nuneaton, UK, Motor Industry Research Association, 290-301.

Toal, D. J. J., Bressloff, N. W. and Keane, A. J., 2008, Kriging hyperparameter tuning strategies, AIAA J., 46(5): 1240-1252.

Toal, David J.J., Bressloff, Neil W. and Keane, Andy J., 2008, Geometric filtration using POD for aerodynamic design optimization. 26th AIAA Applied Aerodynamics Conference, Honolulu, Hawaii, 18-21 Aug 2008.

Bhaskar, K. V., Bressloff, N. W., Nair, P. B. and Shearman, C. P., 2008, Predictive haemodynamics in a one-dimensional human carotid artery bifurcation. Part II: Application to graft design, IEEE Trans. Biom. Eng., 55(3): 1176-1184.

Kolachalama, V. B., Bressloff, N. W. and Nair, P. B., 2007, Mining data from hemodynamic simulations via Bayesian emulation, BioMedical Engineering OnLine, 6:47.

Bressloff, N. W., 2007, Parametric geometry exploration in the carotid artery bifurcation, J. Biomech. , 40: 2483-2491.

Bhaskar, K. V., Bressloff, N. W., Nair, P. B. and Shearman, C. P., 2007, Predictive haemodynamics in a one-dimensional human carotid artery bifurcation. Part I: Application to stent design, IEEE Trans. Biom. Eng., 54(5): 802-812.

Banks, J. and Bressloff, N. W., 2007, Turbulence modeling in three-dimensional stenosed arterial bifurcations, ASME J. Biomech. Eng., 129: 40-50.

Ursache, N. M., Keane, A. J. and Bressloff, N. W., 2006, The design of post-buckled spinal structures for airfoil camber and shape control, AIAA J., 44(12): 3115-3124.

Hoyle, N., Bressloff, N. W. and Keane, A. J., 2006, Design Optimization of an Engine Air Intake, 2006, AIAA J., 44(11): 2672-2681.

Forrester, A. I. J., Keane, A. J. and Bressloff, N. W., 2006, Design and analysis of noisy computer experiments, 2006, AIAA J., 44(10): 2331-2339.

Pattenden, R. J., Bressloff, N. W., Turnock, S. R. and Zhang, X., 2006, LES and DES applied to the turbulent flow around a short surface-mounted cylinder, Int. J. Num. Meth. Fl. 53(6): 895-914. DOI: 10.1002/fld.1309.

Barrett, T. R., Bressloff, N. W. and Keane, A. J., 2006, Airfoil Shape Design and Optimization Using Multi-Fidelity Analysis and Embedded Inverse Design, AIAA J., 44(9): 2051-2060.

Forrester, A. I. J., Bressloff, N. W. and Keane, A. J., 2006, Optimisation using Surrogate Models and Partially Converged Computational Fluid Dynamics Simulations, , R. Soc. Proc. A. 462: 2177-2204

Barrett, T. R., Bressloff, N. W. and Keane, A. J., 2006, Airfoil Design and Optimization Using Multi-Fidelity Analysis and Embedded Inverse Design, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Struc. Dyn., Mat. Conf., AIAA 2006-1820, Rhode Island, USA.

Ursache, N. M., Keane, A. J. and Bressloff, N. W., 2006, On the design of morphing airfoils using spinal structures, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Struc. Dyn., Mat. Conf., AIAA 2006-1796, Rhode Island, USA.

Bhaskar, K. V., Bressloff, N. W., Nair, P. B. and Shearman, C. P., 2005, A parametric study of the hemodynamic behavior in a one dimensional systemic elastic artery: Application to stent design, 12th International Conference on BioMedical Engineering (ICBME 2005).

Sobester, A., Keane, A. J., Scanlan, J. and Bressloff, N. W., 2005, Conceptual Design of UAV Airframes Using a Generic Geometry Service , AIAA-2005-7079, Infotech@Aerospace, Arlington, VA, September 2005 .

Bressloff, N. W., Banks, J. and Shearman, C. P., 2005, Systematic exploration into the hemodynamic effect of an out-of-plane internal carotid artery , 2005 Bioengineering Conference, ASME 2005.

Bhaskar, K. V., Bressloff, N. W. and Nair, P. B., 2005, Multi-objective shape optimization of the human carotid artery, Proc. Third MIT Conference Computational Fluid and Solid Mechanics 2005. Ed. K. J. Bathe, 1310-1314, Elsevier.

Hoyle, N., Bressloff, N. W. and Keane, A. J., 2005, Design Optimization of an Engine Air Intake, Proc. Third MIT Conference Computational Fluid and Solid Mechanics 2005. Ed. K. J. Bathe, 1254-1258, Elsevier.

Stuck, Arthur, Turnock, Stephen and Bressloff, Neil (2004) An evaluation of the RANS method for the prediction of steady ship rudder performance compared to wind tunnel measurements. Southampton, UK, University of Southampton, 72pp. (Ship Science Reports, 130) http://eprints.soton.ac.uk/46049/

Forrester, A. I. J., Bressloff, N. W. and Keane, A. J., 2006, Computational Design Methods, United States Patent 7092845.

Bressloff, N. W., Banks, J. and Bhaskar, K. V., 2004, Parametric geometry modeling of the carotid artery bifurcation; the need for new flow metrics, Proc. Int. Workshop Flow and Motion, Zurich, Switzerland, 104-105.

Bressloff, N. W., Forrester, A. I. J., Banks, J. and Bhaskar, K. V., 2004, Shape optimization of the carotid artery bifurcation, Proc. 5th ASMO-UK/ISSMO Conf. on Engineering Design Optimisation, Stratford upon Avon, UK.

Ursache, N. M., Bressloff, N. W., and Keane, A. J., 2004, The design of post-buckled spinal structures for airfoil shape control using optimization methods, Proc. 5th ASMO-UK/ISSMO Conf. on Engineering Design Optimisation, Stratford upon Avon.

Bressloff, N. W., Banks, J. and Bhaskar, K. V., 2004, Parametric geometry definition and analysis of the human carotid artery bifurcation, IMECE2004-59124, ASME Mech. Eng. Cong., Anaheim, California.

Darby, S., Massimo, R., Spyropoulos, E., Bressloff, N. W. and Liliana, T., 2004, Fluvial bank erosion rates in meander bends: insights from a monitoring and modelling study in the UK and Italy, 32nd IGC, Florence, Italy.

Batten, W.M.J., Turnock, S., Bressloff, N. W. and Abu-Sharkh, S. M., 2004, Turbulent Taylor-Couette vortex flow between large radius ratio concentric cylinders. Experiments in Fluids. 36, 3: 419-421.

Pattenden, R. J., Turnock, S. R. and Bressloff, N. W., 2004, The use of detached-eddy simulation in ship hydrodynamics, 25th Symposium on Naval Hydrodynamics, St. John's, Newfoundland and Labrador, CANADA.

Forrester, A. I. J., Bressloff, N. W. and Keane, A. J., 2003, Response surface model evolution, 16th AIAA Computational Fluid Dynamics ConferenceAIAA-2003-4089, Orlanda, USA.

Pattenden, R. J., Turnock, S. R. and Bressloff, N. W., 2003, Developments in thte use of large eddy simulation for ship hydrodynamics, 3rd CFD Techniques in Ship Hydrodynamics, Royal Institute of Naval Architects, London.

Batten, W.M.J., Bressloff, N. W. and Turnock, S., 2002, Numerical simulations of the evolution of Taylor cells from a growing boundary layer on the inner cylinder of a high radius ratio Taylor-Couette system. Physical Review E. 66: (066302) 1-5.

Pattenden, R. J., Turnock, S. R. and Bressloff, N. W., 2002, An experimental and computational study of three-dimensional unsteady flow features found behind a truncated cylinder, 24th Symposium on Naval Hydrodynamics, Fukuoka, JAPAN, 208-221.

Barton, I. E., Markham-Smith, D. and Bressloff, N., 2002, Finite volume scheme for the solution of fluid flow problems on unstructured nonstaggered grids. International Journal for Numerical Methods in Fluids. 38(8): 747-768.

Batten, W., Bressloff, N. W. and Turnock, S., 2002, Transition from vortex to wall driven turbulence production in the Taylor-Couette system with a rotating inner cylinder. International Journal for Numerical Methods in Fluids. 38(3): 207-226.

Bressloff, N. W., 2001, Three-dimensional pulsatile flow through asymmetrically and symmetrically constricted vessels, BED-Vol 50, 2001 Bioengineering Conference, 525-526, ASME 2001.

Bressloff, N. W., 2001, A Parallel Pressure Implicit Splitting of Operators Algorithm Applied to Flows at all Speeds, International Journal for Numerical Methods in Fluids, 36: 497-518.

Bressloff, P. C., Bressloff, N. W. and Cowan, J. D., 2000, Dynamical mechanism for sharp orientation tuning in an integrate-and-fire model of a cortical hypercolumn. Neural Computation 12(11): 2473-2511.

Bressloff, N. W., 1999, The Influence of Soot Loading on Weighted Sum of Gray Gases Solutions to the Radiative Transfer Equation across Mixtures of Gases and Soot, International Journal of Heat and Mass Transfer , 42(18): 3469-3480.

Bressloff, P. C., Bressloff, N. W., 1999, Nonlinear dynamics of a pulse-coupled neural oscillator model of orientation tuning in the visual cortex. In AIP Conference Proceedings , 80-87.

Bressloff, P. C., Bressloff, N. W. and Cowan, J. D., Integrate-and-Fire networks and the Ring Model of Orientation tuning, presented at the Santa Fe Institute Workshop on "Understanding the Visual Cortex", April 11-15, 1999.

Bressloff, N. W.,Parallelisation of the Discrete Transfer Radiation Model, Parallel Computational Fluid Dynamics '97, eds. Ecer, A., Emerson, D., Periaux, J. and Satofuka, N., 307-316, North-Holland (1997).

Bressloff, N. W., Moss, J. B., Rubini, P.A., 1997, The Differential Total Absorptivity Solution to the Radiative Transfer Equation for Mixtures of Combustion Gases and Soot, Numerical Heat Transfer, Part B : Fundamentals, 31(1): 43-60.

Bressloff, N. W., Moss, J. B. and Rubini, P. A., 1996, CFD Prediction of Coupled Radiation Heat Transfer and Soot Production in Turbulent Flames, in : Twenty-Sixth Symposium on Combustion 2: 2379-2386, Combustion Institute, Pittsburgh, PA.

Bressloff, N. W., Moss, J. B., Rubini, P.A., 1996, Assessment of a Differential Total Absorptivity Solution to the Radiative Transfer Equation as Applied in the Discrete Transfer Radiation Model, Numerical Heat Transfer, Part B : Fundamentals, 29(3): 381-397.

Bressloff, N. W., Moss, J. B., Rubini, P.A., 1995, Application of a New Weighting Set for the Discrete Transfer Radiation Model, Proceedings of the 3rd European Conference on Industrial Furnaces and Boilers, 2: 208-215.

Cox, G, Bressloff, N. W. and Rubini, P. A., 1995, CFD Modelling of a Fire Resistance Furnace, Proc. 1st IAFSS European Symposium Zurich, Switzerland. 

Baines, N. C. and Bressloff, N., 1994, The Differential Gas Turbine Using Electric Transmission, International Gas Turbine and Aeroengine Congress and Exposition, The Hague, Netherlands, 94-GT-84, ASME.


Dr Neil W. Bressloff

University of Southampton, Highfield, SO17 1BJ, UK.

Tel. 0 (44) 2380 595473

Dr Neil W. Bressloff

n.w.bressloff@soton.ac.uk


PhD Projects

Coronary Artery Stent Design for Challenging Disease. Giorgos Ragkousis

Transport Phenomena across Biological Cell Membranes within Microfluidic Lab-on-a-Chip Systems. Dario Carugo.

Computational Turbulence Modelling of Marine Rim Driven Thrusters. Aleksander Dubas.

Multi-scenario Computational Modelling of Failure Process and Periprosthetic Fluid Flow in Cementless Total Hip Replacement. Hamidreza Alidousti.

Multi-objective Design of Coronary Stents. Sanjay Pant.

Design of Lean-Burn Injectors. Moresh Wankhede.

Non-Newtonian Flow in Micro-Vessels. Mohamed Mansour.

Flow-Field Knowledge Assisted Aerodynamic Optimization. Giles Endicott.

Proper Orthogonal Decomposition and Kriging Based Strategies for Design. David Toal.

Geometry Parameterisation for Aircraft Configurations. Adam Nurdin.

Predictive Haemodynamics of the Human Carotid Artery. Vijaya Bhaskar Kolachalama.

Variation of Stenosis Shape and Location in the Carotid Artery Bifurcation. Jim Banks.

Aerodynamic Design Optimization using Flow Feature Parameterization. Tom Barrett.

Wing Morphing Optimisation. Narcis Ursace

Automated Multi-Stage Geometry Parameterization of Internal Fluid Flow Applications. Nici Hoyle

Using e-Science/Grid Technologies to Model River Bank Erosion in a Range of Physiographic Environments. Emmanouil Spyropolous.

Efficient Global Aerodynamic Optimisation Using Expensive Computational Fluid Dynamics Simulations. Alex Forrester

Numerical Predictions and Experimental Analysis of Small Clearance Ratio Taylor-Coutte Flows. Will Batten.

Companies

Abbott Vascular

Arterius
Boston Scientific
Medtronic
Rolls-Royce PLC